WHAT ARE ALL THE SKYFORCE WIRES FOR?

Follow

The Skyforce has 3 different sets of wires coming out from under the canopy. 

1. The black wire wrapped around the landing gear is the receiving antenna and should NOT be unraveled. Leave it as is.

 

2. The red, blue, and black wires are the input charging to the battery and are used to charge the battery.

 

3. The red and black wires are output from the battery to power the helicopter. The plug goes in the slot behind the two small clear LED lights on the right side. It must be pushed all the way in to power the helicopter. Always remove this plug while charging the battery and replace to fly.

Have more questions? Submit a request

Comments

Powered by Zendesk